PixieBoard PRO+

Be the first to review this product


Availability: In stock

Quick Overview

Deploy Connected ML Solutions with PixieBoard PRO+

  • i.MX6QuadPlus ARM® Cortex™-A9 @ 1.2GHz plus 2D and 3D GPUs

  • Wireless Interfaces Include: WiFi 802.11b/g/n/ac, Bluetooth® 4.2 (w/BLE), LTE/3G and GPS

  • 4GB 64-bit RAM

  • 9-axis IMU (accelerometer, gyro and magnetometer)

  • Expansion Board: Gigabit Ethernet, PCIe x1, SDIO, 2 MIPI, SATA-II, RGB666, USB 2.0 HS, CAN, SPI, 2 UART, 2 I2C, GPIOs

PixieBoard PRO+ is available for purchase in increments of 1


PixieBoard PRO+ is a single-board computer where you can evaluate the performance and flexibility of NXP’s i.MX6Q Application processor along with high-end wireless interfaces. PixieBoard PRO+ is small enough to hold in your palm, yet powerful enough to perform as a server. With an i.MX6Q Quad-core ARM® Cortex™-A9 running at 1.0 GHz, plus 2D and 3D GPUs and an embedded 4GB 64-bit DDR3 RAM, PixieBoard PRO+ is capable of running rich multimedia applications, embedded web servers, digital entertainment systems, industrial control systems, high definition video and anything you can imagine.

With included state-of-the-art wireless and mobile broadband interfaces, PixieBoard PRO+ offers the highest available throughput. It offers a high bandwidth WiFi 802.11b/g/n/ac, Bluetooth® 4.2 (w/BLE), 2.1 + EDR, GPS, and Mobile Broadband interfaces (LTE/3G) to enable any connectivity scenario you encounter. With PixieBoard PRO+, streaming and wireless connectivity will never be an issue.

At only 2” by 3.5” (52mm x 91 mm), PixieBoard PRO+ easily gets you connected wirelessly or through the smallest, yet most resilient connectors. It includes 2 USB Type-A port and 1 micro USB port (OTG), 1 micro HDMI output, 2 micro SD slots and a 3.5mm line out / mini TOSLINK® optical port. If that wasn’t enough, it also provides Gigabit Ethernet, PCIe x1, SDIO, 2 MIPI, SATA-II, RGB666, USB 2.0 HS, CAN, SPI, 2 UART, 2 I2C and several GPIOs in board-to-board connectors so you can create your own daughter card to get your PixieBoard PRO+ even farther.

PixieBoard PRO+ was conceived to be a powerful computing machine with enough integrated peripherals to accommodate most applications, but without any of the extra clutter found in common reference platforms.

Required accessories:


FCC NOTICE: This kit is designed to allow:

(1) Product developers to evaluate electronic components, circuitry, or software associated with the kit to determine whether to incorporate such items in a finished product and

(2) Software developers to write software applications for use with the end product. This kit is not a finished product and when assembled may not be resold or otherwise marketed unless all required FCC equipment authorizations are first obtained. Operation is subject to the condition that this product not cause harmful interference to licensed radio stations and that this product accept harmful interference. Unless the assembled kit is designed to operate under part 15, part 18 or part 95 of this chapter, the operator of the kit must operate under the authority of an FCC license holder or must secure an experimental authorization under part 5 of this chapter.


ProcessorFreescale i.MX6Q Soc QuadPlus Core ARM® Cortex™-A9 up to 1GHz
RAM4GB DDR3 in x64 Configuration
MultimediaIntegrated 2D and 3D GPUs & h.264 video encode/decode @1080p30
  • OpenGL ES 2.0 3D graphics accelerator with four shaders
  • Two 3D graphics engines
  • OpenVG 1.1 accelerator
DisplayHDMI Standard Interface Port v1.4 for up to 1080p 60Hz HDTV resolutions
  • WiFi: 802.11 a/b/g/n/ac @ 2.4GHz, 5GHz, 2x2 MIMO
  • Bluetooth®: 4.2 (w/BLE), 2.1 + EDR
  • NFC: ISO 14443A/B, 18092, 15693, NFCIP-1, NFC Forurm
  • Mobile Broadband: LTE and UMTS/HSPA+ 3G module
Storage2 UHS-I SD Card Ports with transfer rates up to 104 MB/s
Audiomini TOSLINK® optical port / 3.5mm line out
Sensors9-axis IMU (accelerometer, gyro and magnetometer)
USB2 Type-A Host USB 2.0 , 1 microUSB OTG
Expansion Port
  • Gigabit Ethernet
  • PCIe x1
  • SDIO
  • 2 MIPI
  • RGB666
  • USB 2.0 HS
  • CAN
  • SPI
  • 2 UART
  • 2 I2C
  • GPIOs
  • Vcc and Gnd
Power Input5 V DC (either through power jack or USB-powered)
Dimensions52mm by 91mm
***Heatsink not show.

Development Resources



  • Schematics (coming soon)
  • Mechanical Drawings (coming soon)


  • Arch Image
  • Ubuntu Image
  • Yocto Image


  • Coming soon


You may also be interested in the following product(s)

Write Your Own Review

You're reviewing: PixieBoard PRO+